UNS S32750 Seamless Pipe fittings are made of UNS S32750 Seamless Pipes and Match UNS S32750 Flanges in the pipeline
OD: 1/2″ to 48″
Wall Thickness (Schedules)
Available in SCH 10S, 20, 40S, 80S, 160, XXS, and custom thicknesses
Compliant with ASME B36.10 / B36.19
astm a815 wps uns s32750 Elbow Super Duplex Stainless steel Pipe Fittings B16.9 Read More »
ASTM A403 WPS S31254 Pipe Fittings (commonly known as 254 SMO fittings) are engineered for extreme corrosion resistance in chloride-rich and marine environments.
Material: ASTM A403 WPS / UNS S31254 / 254 SMO
Sizes: ½” to 48” (DN15 – DN1200)
Pressure Classes: SCH 10S to SCH 160 / XXS
Available in elbows, tees, reducers, caps, stub ends, and crosses
ASTM A403 WP S31254 Elbow Tee Reducer ASME B16.9 Pipe Fittings Read More »
ASTM A420 / A420M – Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
Typical Low-Temperature Piping Assembly:
Pipe: ASTM A333 Gr. 6 Seamless Pipes
Fittings: ASTM A420 WPL6 (elbows, tees, reducers)
Flanges: ASTM A350 LF2 Cl.1 (weld neck, slip-on, blind, etc.)
ASTM A420 WPL6 Low Temperature Pipe Fittings Read More »
GOST 17375-2001. Carbon and low-alloy steel butt-welding fittings. Sharply curved bends type 3D (R=1,5 DN). Design
Standard: GOST 17375-2001
Radius: R = 1.5 × D (where D = nominal pipe diameter)
Angles Available: 45°, 90°, 180° bends
Nominal Sizes: DN 15–DN 800
GOST 17375-2001 Ct20 elbows Read More »
A CuNi 90/10 elbow is a pipe fitting formed at a standard angle (90° or 45°) that changes the direction of flow in a piping system. Made from copper-nickel alloy containing approximately 90 % copper and 10 % nickel (UNS C70600),
MATERIALS : Cu-Ni 90/10, Cu-Ni 70/30
DIMENSION : DIN 86090
Type & Construction : SEAMLESS (10 & Below)
SEAM WELDED (12 & Over)
Copper Nickel Elbow DIN 86090 CuNi 90/10 C70600 Elbow Read More »